Dual Channel Lamp Module Dimmer (LM2-8)

The LM2-8 Dual Channel Lamp Module is a high quality plug-in home automation lamp dimmer that is capable of transmitting and receiving digital commands and status over the existing powerlines.

The LM2 is perfect for master bedrooms and living rooms where two lamps need
to be remotely controlled. Simply plug the LM2 into any standard wall outlet and plug the lamp(s) into the LM2’s two bottom controlled outlets.

The LM2 is designed for controlling incandescent, fluorescent, or magnetic low voltage loads. It can provide as much as 800W of power at any one time split between the two channels. The dimmer function can also be disabled, turning the outlets into a switch, to allow the LM2 to turn on and off non-dimmable loads such as fans or radios.

Lamp Module – Dimmer (LM1-4)

The LM1 Lamp Module is a high quality plug-in home automation lamp dimmer that is capable of transmitting and receiving digital commands and status over the existing powerlines. 

The LM1 is perfect for remotely controlling one or more 120VAC lamps.  Simply plug the LM1 into any standard wall outlet and plug the lamp into the LM1’s bottom controlled outlet. 

The LM1 is designed for controlling incandescent, fluorescent or magnetic low voltage loads and provides as much as 400W of power to the lamp(s).  The dimmer function can also be disabled, turning the outlets into a switch, to allow the LM1 to turn on and off non-dimmable loads such as fans or radios.

Appliance Module (AM1-12)

The AM1 Appliance Module is a high quality plug-in home automation relay load controller that is capable of transmitting and receiving digital commands and status over the existing powerlines. 

The AM1 is perfect for remotely controlling one or more 120VAC non-dimming appliances.  Simply plug the AM1 into any standard wall outlet and then plug the appliance into the AM1’s bottom controlled outlet. 

The AM1 is designed for controlling non-dimming loads up to 12 Amps. A pass-through outlet allows plugging in vacuums, computers, and other devices that do not require remote control.

Output Control Module (OCM)

The OCM Output Control Module is a high quality plug-in home automation isolated relay contact controller capable of transmitting and receiving digital commands and status over the existing powerlines. 

The Output Control Module provides two independent channels of general purpose isolated relay contact outputs to control motors, lights, or to produce contact closures for other control devices.

Simply plug the OCM into any standard wall outlet and wire the device to the controlled relay.  The OCM is designed in a white enclosure with two completely isolated Class 2 contacts rated at 8 Amps each.

Fixture Module – Dimming 2 Channels (FMD-2-4)

The FMD Fixture Module Dimmer is a two channel high quality wire-in home automation light dimmer which is capable of transmitting and receiving digital commands and status over the existing powerlines.

The FMD is the ideal solution to controlling incandescent lights or fixtures that need to be individually controlled or are not currently wired to a dedicated wall switch location.

With two separate control channels, the FMD is perfect for certain ceiling fans with lights combinations and provide as much as 400W of power at any one time split between the two channels.

Fixture Module – Relay (FMR1)

The FMR1 Fixture Module Relay is a single channel high quality wire-in home automation non-dimming relay load controller which is capable of transmitting and receiving digital commands and status over the existing powerlines.

The FMR1 is the ideal solution for fluorescent lights or other non-dimming loads (such as motors or transformers) that need to be individually controlled but are not currently wired to a dedicated wall switch location. The high 20A rating of the Fixture Module Relay can control any conventional 20A residential circuit.