Load Controllers

The PulseWorx product line delivers a complete line of UPB-compatible load-contolling Wall Switches with the most extensive range of power ratings on the market today. The PulseWorx product line also has a complete line of plug-in and wire-in load control modules to enable the remote control of practically any device that connects to the AC powerline.

Wall Switch – Standard Dimmer (WS1D)

The WS1D Wall Switch Dimmer is a high quality home automation dimmer switch used to control incandescent, fluorescent, inductive and magnetic low voltage devices, that is capable of transmitting and receiving digital commands and status over the existing powerlines.

The WS1D is perfect for controlling incandescent, fluorescent, inductive and magnetic low voltage loads.

The WS1D line of Wall Switch Dimmers has the most complete set of power ratings (600W, 1000W, 1500W, and 2400W) found on the market today. Available in six colors: white, almond, ivory, brown, black and grey to match practically any décor.

Wall Switch – LED/CFL Dimmer (WS1DL)

The WS1DL was designed to solve the difficult task of figuring out the right dimmer for the different light sources on the market today.  It will operate LED and CFL lighting, as well as fluorescent, inductive, magnetic LV loads, and the most popular incandescent and halogen lights too.

LEDs, light emitting diode bulbs and CFLs, compact fluorescent lamps are all the rage, to save energy, over incandescent or halogen lights; however, dimming them may be difficult.

Giving you the ability to reliably control all of those sources is great, however the WS1DL has a dimming profile that is optimized specifically for dimmable LED’s and CFL “twist” bulbs. 

This profile provides smoother dimming throughout its range and makes it easier than ever to set the minimum dimming level to prevent flickering or drop off.

Wall Switch – Electronic Low Voltage Dimmer (WS1E)

The WS1E ELV Wall Switch Dimmer is a high quality home automation switch dimmer used control electronic low voltage AC lighting ballasts or transformers  that is capable of transmitting and receiving digital commands and status over the existing powerlines.

The WS1E is perfect for controlling electronic low voltage AC lighting ballasts and transformers.

Note: these types of transformers usually have a note such as: “fully dimmable using a dimmer designed for an electronic transformer. An electronic transformer can sometimes work with a standard incandescent dimmer. However, to ensure that your lighting system works effectively with the greatest dimming range we recommend that you use a dimmer that was specifically designed to control an electronic low voltage transformer. Additionally, using this type of dimmer will diminish the possibility of an audible hum when the dimmer is used – especially at low light levels.”

Two power ratings (300VA and 500VA) will handle most ELV transformers currently on the market.  Available in six different colors: white, almond, ivory, brown, black and grey to match practically any décor.

Mark X Ballast Dimmer/Switch (WS1X)

Wall Switch – Auxiliary Remote (RWS-S)

The RWS Remote Wall Switch is a high quality auxiliary rocker switch designed to provide three-way or multi-way lighting control to a PulseWorx WS1 Wall Switch Dimmer.

The RWS connects to a Wall Switch Dimmer (WS1D or WS1E) via the yellow “traveler” wire to provide three-way or multi-way control.

Pressing the remote’s paddle style rocker switch will cause the WS1 Wall Switch Dimmer (sold separately) to react the same as if its own local rocker switch was pressed.  The RWS can be wired as far as 1000 feet away.  A blue LED is provided on top of the rocker to find the switch in the dark.

Dual Channel Lamp Module Dimmer (LM2-8)

The LM2-8 Dual Channel Lamp Module is a high quality plug-in home automation lamp dimmer that is capable of transmitting and receiving digital commands and status over the existing powerlines.

The LM2 is perfect for master bedrooms and living rooms where two lamps need
to be remotely controlled. Simply plug the LM2 into any standard wall outlet and plug the lamp(s) into the LM2’s two bottom controlled outlets.

The LM2 is designed for controlling incandescent, fluorescent, or magnetic low voltage loads. It can provide as much as 800W of power at any one time split between the two channels. The dimmer function can also be disabled, turning the outlets into a switch, to allow the LM2 to turn on and off non-dimmable loads such as fans or radios.

Lamp Module – Dimmer (LM1-4)

The LM1 Lamp Module is a high quality plug-in home automation lamp dimmer that is capable of transmitting and receiving digital commands and status over the existing powerlines. 

The LM1 is perfect for remotely controlling one or more 120VAC lamps.  Simply plug the LM1 into any standard wall outlet and plug the lamp into the LM1’s bottom controlled outlet. 

The LM1 is designed for controlling incandescent, fluorescent or magnetic low voltage loads and provides as much as 400W of power to the lamp(s).  The dimmer function can also be disabled, turning the outlets into a switch, to allow the LM1 to turn on and off non-dimmable loads such as fans or radios.

Appliance Module (AM1-12)

The AM1 Appliance Module is a high quality plug-in home automation relay load controller that is capable of transmitting and receiving digital commands and status over the existing powerlines. 

The AM1 is perfect for remotely controlling one or more 120VAC non-dimming appliances.  Simply plug the AM1 into any standard wall outlet and then plug the appliance into the AM1’s bottom controlled outlet. 

The AM1 is designed for controlling non-dimming loads up to 12 Amps. A pass-through outlet allows plugging in vacuums, computers, and other devices that do not require remote control.

Output Control Module (OCM)

The OCM Output Control Module is a high quality plug-in home automation isolated relay contact controller capable of transmitting and receiving digital commands and status over the existing powerlines. 

The Output Control Module provides two independent channels of general purpose isolated relay contact outputs to control motors, lights, or to produce contact closures for other control devices.

Simply plug the OCM into any standard wall outlet and wire the device to the controlled relay.  The OCM is designed in a white enclosure with two completely isolated Class 2 contacts rated at 8 Amps each.

Fixture Module – Dimming 2 Channels (FMD-2-4)

The FMD Fixture Module Dimmer is a two channel high quality wire-in home automation light dimmer which is capable of transmitting and receiving digital commands and status over the existing powerlines.

The FMD is the ideal solution to controlling incandescent lights or fixtures that need to be individually controlled or are not currently wired to a dedicated wall switch location.

With two separate control channels, the FMD is perfect for certain ceiling fans with lights combinations and provide as much as 400W of power at any one time split between the two channels.

Fixture Module – Relay (FMR1)

The FMR1 Fixture Module Relay is a single channel high quality wire-in home automation non-dimming relay load controller which is capable of transmitting and receiving digital commands and status over the existing powerlines.

The FMR1 is the ideal solution for fluorescent lights or other non-dimming loads (such as motors or transformers) that need to be individually controlled but are not currently wired to a dedicated wall switch location. The high 20A rating of the Fixture Module Relay can control any conventional 20A residential circuit.